From Audio46: The 2-pin connector is FLAT. Please check if your IEM is flat or recessed before purchasing. For example, MoonDrop IEMs have a recessed 2-pin, meaning the connection will be loose and potentially unreliable.

UTWS5 (2025) True Wireless Bluetooth Amplifier

Qualcomm QCC5141 | Independent DAC AK4332 | New-gen TWM technology
96kHz/24bit Hi-res wireless | High-capacity charging case | Wireless charging

Unprecedented true wireless receiver with independent DAC

The UTWS5 is the first true wireless receiver utilizing an independent AK4332 DAC. Compared to the previous generation, the amplifier of the UTWS5 has a lower noise floor, high signal-to-noise ratio, and higher output power by 40%!

UTWS5 Working Process

Reaching new heights with Bluetooth
Flagship Qualcomm QCC5141

One must continue to challenge one's self to continually set new bars of excellence. The Qualcomm QCC5141 in the UTWS5 brings two major upgrades compared to the previous generation QCC3020. Not only does the QCC5141 bring a significant leap in decoding high-resolution music, it also brings a significant improvement to calls with support for aptX Voice high-definition voice technology.

Third-gen TWS mode
Lower latency and more reliability

Qualcomm's third-gen TWS Mirroring as utilized on the UTWS5 effectively reduces latency and instability for a better experience. Unlike TWS+, TWS Mirroring allows for seamless switching between being connected to the main and secondary ear units. This allows for a greater compatibility with various Bluetooth devices, all with lower latency and more reliable connections.

Bluetooth 5.2
96kHz/24bit Hi-Res audio support

Thanks to the Snapdragon sound suite of technologies, you can truly experience wireless high-resolution sound no matter what you are doing. Support for aptX adaptive allows you to listen to 96kHz/24-bit high-resolution audio all with lower latency. And aptX voice enables 32kHz super wideband voice calls for true high-definition calls over Bluetooth.

Truly unshackled wireless charging

The charging case not only has an enormous 800mAh battery that can provide up to 30 hours of battery life, but is also capable of wireless charging - for the ultimate convenience of true freedom from cables.

800h
a battery life

30h
total battery life

3 to 4
3-4 charges

**This product does not include a wireless charger.

High marks for more adjustable levels

Compared to the previous generation, the UTWS5 now features 32 levels of volume adjustment instead of 26 levels to let you more precisely set how loud you want your audio.

Give your earphones a more secure home

The included charging case not only features a sturdy construction to better protect your earphones, but also sports a large capacity to accommodate a greater variety of earphones attached to the UTWS5 - making it more convenient for charging, pairing, switching, and other operations.

No pressure from its light weight

Every last detail has been engineered to give you more comfort.

Take it wherever you go

Connect to two devices simultaneously via Bluetooth Switch to either device you want

The UTWS5 can be connected to two mobile phones at the same time. Just pause music on one of the mobile phones, and freely switch to the other one to listen to music or answer a call.

10-band PEQ precise tuning Born for good sound

The PEQ (Parametric Equalizer) function was designed for the FW5, which supports 10-band self-defined tuning. On the FiiO Music App or the FiiO Control App, users can self adjust the frequency, gain level, Q value, etc., achieving more accurate frequency response among every frequency range while ensuring high-fidelity sound quality. Also, it supports up to 192kHz/24bit under PEQ style.

Every touch carefully designed
Ultra-sensitive, large buttons

The UTWS5 is not a case of form over function. The attractive large tactile button not only looks and feel better than ordinary buttons, but has also been engineered for improved responsiveness and reduce false touches. With simple taps, you can quickly access the controls you want.

With its own invisible raincoat
IPX4 water resistance

With an IPX4 rating, no need to worry about the UTWS5 being damaged by water or sweat as you go about your life.

*IPX4 rated as determined by passing rigorous testing in FiiO Labs.

Remarkably convenient apps

Through either the FiiO Control or FiiO Music apps, you can adjust channel balance and other audio options. Continued firmware updates pushed through the app, as well as updates to the app itself will ensure a stable user experience for years to come.

Channel-balance
English and Chinese voice prompts
OTA updates

Specifications

General specifications
Model Name	UTWS5	Hardware solution	DAC: AK4332 Bluetooth：QCC5141
Color	Black	Volume Control	Button control
Weight	122g (Includes ear hooks)	Channel balance	L12~R12（0.5dB per level）
Charging Indicator	The white light on the earhook is always on and goes out when fully charged.	FiiO Control	Yes
Bluetooth multipoint	Yes	EQ & PEQ	Yes
Bluetooth（5.2）	AAC/SBC/aptX/atpX adaptive/LHDC	Firmware upgrade	The Bluetooth version can be upgraded via OTA.
Power-saving shutdown	Automatic shutdown, and the time can be set in FiiO Music.	Low Battery Warning	Yes
Sampling Rate Supported Up to	96kHz-24bit	Recommended Headphone Impedance	16~100 Ω
Buttons and ports
Buttons	Physical buttons	Headphone output ports	MMCX/0.78mm Pins
Power parameters
Power Input	DC 5V 1A or more	Battery Capacity	Ear hooks：60mAh Charging case：800mAh
Charge Time	Ear hooks≤1.5h Charging case≤2h	Battery Life	＞8h （AAC）
Charge Time	Ear hooks≤1.5h Charging case≤2h	Battery Life	The charging case can charge the earhook: 4 times
Audio parameters
Earphone output performance parameters (MMCX)
Output power 1	≥54mW（16Ω / THD+N＜1%)	Output Impedance	＜0.4Ω（32Ω）
Output power 2	≥33mW（32Ω /THD+N＜1%)	Channel Separation	≥86dB (1 kHz/32Ω)
Noise floor	＜2μV（dbA）	THD+N	＜0.002% (1 kHz/32Ω/dbA)
Frequency response	10Hz~41kHz (-3dB)	SNR	≥109dB (dbA)
Frequency response	10Hz~41kHz (-3dB)	Peak Output Voltage	＞2.9Vp-p

(Ambient mode is disable on the 2025 version. If you'd like to enable it, you'll need to be on firmware v0.63 or higher)

FiiO UTWS5 True Wireless Bluetooth In-Ear Headphone Receiver (2025 Version) (Open Box)

Email me when available