Nitro for your headphones.

Fully-balanced. 1,600mW. Battleship headphone amplifier.

52x more power. Pump up the volume.

Laptops and smartphones have a really low power output of <1.0v. On a good set of headphones you’re always running out of juice. You never get to really hear what they can do.

Use a laptop, phone or DAC to feed your music to the ZEN CAN and connect your headphones. Pumping out 52x more power, now you’ll hear what you have been missing.

Balanced to thrill

The ZEN CAN has trickle-down Class A discrete balanced circuitry from iFi audio’s US$1,699 flagship Pro iCAN. With 15.1v @300 Ohms on tap, it has serious power that will make even difficult-to-drive headphones thump to the beat.

Class A discrete output buffer from the flagship Pro iCAN using Op-Amp (OV2637A)
FET input avoids loading volume control – low distortion/noise
Low impedance feedback circuit enhances circuit performance with no resistor noise
Output amplifier gain of four steps in +6dB perfect for headphone matching

Puts you at the venue. Not other way round.

Audio recordings are made for speakers and when played back on headphones, the sound is always driving you nuts by being only in your head.

Our 3D special sound circuit solves this:

Stereo image that is truly out of your head, in front with height, width & depth
Without colouration or loss of resolution
All analogue circuitry (i.e. without costly and complex digital signal manipulation)

Satisfies all listeners.

Ace of XBass

Behind XBass is our active EQ circuit which meets a common gripe with headphones head-on, a lack of bass.

Open-back headphones in particular, let all frequencies (especially those precious bass frequencies that the drivers generate so little of) leak freely out of the back instead of trapping and redirecting them back to your ears.

XBass equalisation is a much more elegant solution to bass correction than seen elsewhere. It consists of active and passive components and its frequency response curve corrects their low-end response problems with precision.

Packed with premium goodness

Underpinning the Balanced and Active EQ circuitry are:

Panasonic ECPU capacitors
TDK C0G (Class 1) ceramic capacitors
iFi/AMR ‘OV’ ‘Operationsverstärker’ series op-amps
MELF resistors
Texas Instruments low-noise ICs
muRata capacitors and
Tokyo Cosmos Electric Co. (TOCOS) multi-track potentiometer, with exceptional channel matching even at low volume

Majestic measurements

Output Power

ZEN CAN = 1,600W

Laptop headphone = 30mW

More

A fully discrete and balanced amplifier audio circuit. The full symmetric dual-mono headphone amplifier with gold-plated 4.4mm balanced connection. This exquisitely engineered design is more expensive but lowers the noise floor to a whisper-quiet 120dB.
Class A Discrete is a circuit that has come straight out of the iFi’s flagship headphone amplifier, the Pro iCAN, which at £1,699 is 11 times the price of the ZEN CAN.
This OV series operational amplifier is another example of a top-notch component used to get extremely low noise, low distortion (0.0001%) and wide bandwidth.
TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications. They are pricey but are a perfect addition to our products.
Sonically superior – richer, deeper.
The XBass® analogue bass correction system corrects for the missing headphone/speaker bass response.
An ‘Out of Head’ listening experience. Our 3D Holographic® dual-analogue matrices place the artist with you in the room, not inside your head.

Specifications:

Inputs	4.4mm Pentacon BAL RCA L/R Socket SE 3.5mm Jack SE	4.0V nominal @ 0dBFS, 24 kOhm Zin 2.0V nominal @ 0dBFS, 1 MegOhm Zin 1.0V nominal @ 0dBFS, 1 MegOhm Zin
Max Output	Balanced	>15.1V/385 mW (@ 600 Ohm) >11.0V/1890 mW (@ 64 Ohm)
	S-E	>7.6V/196 mW (@ 300 Ohm) >7.2V/1600 mW (@ 32 Ohm)
Output Impedance (HP)	BAL SE	<2 Ohms <1 Ohm
Zout	Line out	<200 Ohms
THD & N	Balanced S-E	< 0.0007% (4V out, 600 Ohm, 1kHz) <0.006% (@ 100 mW/1.27V 16 Ohm)
SNR	Balanced S-E	>120dBA (@ 15.2V) >118dBA (@ 7.6V)
Max. Input	Balanced RCA 3.5mm	7.4V RMS 3.8V RMS 1.92V RMS
Gain		0dB, 6dB, 12dB and 18dB
Frequency Response		20Hz - 20kHz (+0dB / -0.03dB)
Power consumption	No Signal Max Signal	~5W ~13W
Input voltage		DC 5V/2.4A AC 100 -240V 50/60Hz
Dimensions		160(w) x 117(d) x 35(h) mm 6.3" x 4.6" x 1.4"
Net weight		515g (1.14 Ibs)
Warranty period		12 months

iFi ZEN CAN Headphone Amplifier