SPL Audio at Audio46
Product Details from the Brand
Any mention of "us," "we," "our," etc is by SPL Audio, not Audio46
The headphone amplifier with preamplifier
Enjoy music over headphones and over speakers equally excellently with the superior VOLTAiR technology – that’s why we developed Phonitor x.
For all headphones
The Phonitor x offers connections for standard headphones with jack plug and for balanced headphones a 4-pin XLR connector.
Thanks to the enormous output power of 18 watts, all headphones are driven effortlessly.
To the power amplifiers
or to the active loudspeakers you can use the balanced XLR- for long, and the RCA sockets for short cable runs.
Practical are the AMP CTL sockets to which power amplifiers with 12V trigger inputs can be connected to switch them on and off together with Phonitor x.
Milled from solid
is the big 45mm Volume control. Its mass together with the motorized Alps RK27 “Big Blue” potentiometer enhances the “spoon in the honey” feeling even further.
The red marker LED makes the setting visible even in darkened environments.
The volume can be remote controlled with any infrared remote control, that the Phonitor x simply learns.
To do this, press the IR programming button and then the buttons for louder and quieter.
Source of joy
Up to six (6 !) stereo sources can be connected to Phonitor x:
XLR, RCA, USB, Coax, Optical and AES/EBU
Phonitor x accepts a large variety of audio connections. Balanced via XLR or unbalanced via RCA connectors.
With the optional DAC768xs, three additional digital sources can be added.
Good ol' times
Two mechanical VU meters visualize the input levels for the left and right audio channel.
Finding the middle
is not always easy. By our very nature, hearing can be leaning more to the left or more to the right. This is especially obvious when listening with headphones.
That’s why Phonitor x has the uniquely finely resolved laterality control. With it, the center can be found perfectly.
With the mode switch you can choose between stereo or mono playback. To the right, the laterality control is switched on.
in the headphone amplifier is the Phonitor Matrix, thanks to which you can listen to music through headphones as if you were listening through speakers. The tiring super stereo effect is a thing of the past.
Enjoy your music exactly the way it should be heard.
|Phonitor xe||Phonitor x||Phonitor se||Phonitor 2||Phonitor One||Phonitor One d|
|Crossfeed||6 Values||6 Values||2 Values||6 Values||Potentiometer||Potentiometer|
|Speaker Angle||22° / 30° / 40° / 55°||22° / 30° / 40° / 55°||30°||15° / 22° / 30° / 40° / 55° / 75°||30°||30°|
|Laterality Control||Super fine Balance||●||●||○||●||○||○|
|Solo L/R & Phase||Monitoring functions||○||○||○||●||○||○|
|ø 36mm illuminated VUs||●||●||○||●||○||○|
|0dBVU Calibration (+4dBu)||0 / 6 / 12 dB||0 / 10 dB||○||0 / 6 / 12 dB||○||○|
|Front & Rear Outputs||●||○||○||○||○||○|
|Additional Output Boost||+22 dB||+12 / +22 dB||+12 dB||+6 / +12 dB||○||○|
|1/4” Jack Output power (1 kHz, 1 % THD, 600 Ω)||2 x 2.7 W||2 x 2.7 W||2 x 2.7 W||2 x 2.7 W||2 x 190 mW||2 x 190 mW|
|1/4” Jack Output power (1 kHz, 1 % THD, 250 Ω)||2 x 5 W||2 x 5 W||2 x 5 W||2 x 5 W||2 x 330 mW||2 x 330 mW|
|1/4” Jack Output power (1 kHz, 1 % THD, 32 Ω)||2 x 1 W||2 x 1 W||2 x 1 W||2 x 1 W||2 x 400 mW||2 x 400 mW|
|4-pin XLR (Balanced)||●||●||○||○|
|4-pin XLR Output power (1 kHz, 1 % THD, 600 Ω)||2 x 8 W||2 x 8 W||○||○||○||○|
|4-pin XLR Output power (1 kHz, 1 % THD, 250 Ω)||2 x 3.5 W||2 x 3.5 W||○||○||○||○|
|4-pin XLR Output power (1 kHz, 1 % THD, 32 Ω)||2 x 0.7 W||2 x 0.7 W||○||○||○||○|
|1/4” Jack (Balanced)||○||○||○||○||○||●|
|Speaker Output Selector||○||●||○||●||○||○|
|XLR (Balanced)||●||●||○||● (2x)||○||○|
|1/4” Jack (Balanced)||○||○||○||○||●||●|
|RCA -10dBV to 0dBu Boost||●||○||○||●||○||○|
|DA converter (optional)|
|DLP120 (dual low pass filter)||●||○||○||○||○||○|
|Bit/Max SR kHz||32/768||32/768||32/768||○||○||32/768|
|DSD (max)||256 (11.2MHz)||256 (11.2MHz)||256 (11.2MHz)||○||○||256 (11.2MHz)|
|Housing||WxHxD (incl. Feet)||278 x 100 x 300mm||278 x 100 x 300mm||278 x 57 x 300mm||278 x 100 x 300mm||210 x 49.6 x 220mm||210 x 49.6 x 220mm|
|11” x 4" x 11.81”||11” x 4" x 11.81”||11” x 2.24" x 11.81”||11” x 4" x 11.81”||8.23” x 1.95” x 8.66”||8.23” x 1.95” x 8.66”|
|Weight||5.1kg/11.24lbs||4.3 kg/9.5 lbs||3.1kg; 6.8 lbs||4.3kg; 9.5 lbs||1.2kg; 2,65 lbs||1.45kg; 3.2 lbs|
|*Units learn any IR remote. RC is not part of the scope of delivery.|
Analog inputs & outputs: XLR (balanced) and RCA
Balanced Headphones Output: 4-pol XLR
Standard Headphones Output: 6.35 mm (1/4") TRS Jack
Internal Linear Power Supply with Shielded Toroidal Transformer
Mains Power Supply
Dimensions & Weight
Reference: 0 dBu = 0,775V. All specifications are subject to change without notice.
Slimmer is smarter
Mac OS & iOS
No driver installation required for Mac or iOS devices (class compliant).
iOS devices must be connected using the Apple camera adapter.
To operate with a higher than the standard sample rate this driver installation is required.