↓ Details provided by Audio-Technica ↓
(Specifications and appearance of this product are subject to change without notice)

The AT-LPW50BT-RW extends Audio-Technica’s line of fully manual, belt-drive wood turntables by adding the option of wireless connectivity. Now you can enjoy optimal high-fidelity audio reproduction from vinyl with your choice of wired or wireless operation.

The AT-LPW50BT-RW features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a stunning rosewood-finished wood veneer, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and a matching matte-silver AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50BT-RW is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct wired connection to components with or without a dedicated phono input. The turntable also connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology.

Features

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4(silver) universal ½“-mount headshell and AT-VM95E (black) Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
• The AT-VM95Ecartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Specifications

Communication Specifications

Communication system	Bluetooth version 5.2
RF Output	15 mW EIRP
Maximum Communication Range	Line of sight - approx. 10 m (33')
Frequency Band	2.402 GHz to 2.480 GHz
Modulation Method	GFSK, Pi/4DQPSK, 8DPSK
Supported Bluetooth Profiles	A2DP
Supported Codec	SBC

Turntable Specifications

Type	Belt-drive manual turntable
Motor	DC servo with Active Speed Stabilization
Drive Method	Belt drive
Speeds	33-1/3 RPM, 45 RPM
Turntable Platter	Aluminum Die Casting
Wow and Flutter	< 0.15 % WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio	> 60 dB
Output Level	PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	35 dB nominal, RIAA equalized

Tonearm Specifications

Type	Static balanced straight carbon tonearm
Effective Length	223.6 mm
Overhang	18.6 mm
Maximum Tracking Error Angle	Less than 2.0°
Stylus Pressure Adjustment Range	0 to 3.0 g
Applicable Cartridge Weight Range (including headshell)	11.5 to 16.5 g

Cartridge and Headshell Specifications

Cartridge Model	AT-VM95EBK
Cartridge Type	VM
Recommended Load Impedance	47,000 ohms
Output Voltage	4.0 mV (mV at 1 kHz, 5 cm/sec)
Stylus	0.3 × 0.7 mil bonded elliptical stylus
Cantilever	Aluminum pipe
Tracking Force Range	1.8 to 2.2 g (standard 2.0 g)
Cartridge Weight	6.1 g (0.22 oz)
Headshell Model	AT-HS4 SV
Headshell Weight	8.5 g (including lead wires) 7.7 g (excluding lead wires)
Headshell Overhang Adjustment	±5 mm

General Specifications

Power Supply Requirements	100-240 V, 50Hz/60Hz, 0.6A Max.
Power Consumption	1.8 W
AC Adapter	12 V, 1.0 A
Dimensions	420 mm (16.54") × 340 mm (13.39") × 126 mm (4.96") (W × D × H)
Weight	5.5 kg (12lbs)
Accessories Included	・Dust cover ・Rubber mat ・Platter (with drive belt) ・Dust cover hinges ・Counterweight ・Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95EBK) ・45-RPM adapter ・RCA audio cable (Approx. 1.0 m (3.3')) ・AC adapter (Approx. 1.5 m (4.9'))
Replacement Stylus (sold separately)	AT-VMN95EBK
Replacement Headshell (sold separately	AT-HS4SV
Replacement Belt (sold separately)	AT-LPW50BT exclusive belt

For product improvement, the product is subject to modification without notice.