GO wireless. Go GO pod.

The GO pod ­is a pair of wearable Bluetooth DAC/headphone amps designed to make your premium in-ear monitors (IEMs) wireless.

It is the first device in the world to support Hi-Res 96kHz/24bits with LDAC and Qualcomm Snapdragon Sound (aptX Adaptive) Bluetooth codecs on TWS.

Given the quality of the GO pod’s circuitry, when combined with a well-chosen pair of high-performance IEMs, the resulting sound is far in advance of any ‘true wireless’ earbuds or Bluetooth headphones.

Using a pair of GO pods is simple. First, detach the cable from your favourite IEMs and connect the earpieces to the left and right pods. Then, pair the pods with your source device (a smartphone, for example) and hook the ergonomically designed ear loops around your ears to ensure a comfortable fit… the result is unrivalled TWS (True Wireless Stereo) headphone sound.

Hi-res Bluetooth

Qualcomm’s 24-bit aptX HD and aptX Adaptive formats are also covered, offering sample rates of up to 48kHz and 96kHz respectively, with the additional benefit of QHS (Qualcomm High Speed) providing an extra 300kbps of bandwidth. Other supported codecs include aptX Low Latency, regular aptX, AAC and SBC.

This means that every possible source device is handled at the highest audio resolution its Bluetooth specification allows.

Connected, in more ways than one

IEM manufacturers use a variety of connection types, but whichever is used by your favourite brand iFi has it covered. The GO pod’s detachable ear loop contains the IEM connector, and these are interchangeable – iFi has made ear loops for MMCX, 2pin, Pentaconn, T2 and A2DC connection types.

Distinctly different

True wireless earbuds rely on the SoC (System on a Chip) solution to integrate the requisite tech into a tiny space. Crucial stages like Bluetooth decoding, digital-to-analogue conversion and amplification are all-in-one to save space and cost. This compromises sound quality.

The GO pod is distinctly different. Each critical stage is designed separately and optimised individually to ensure excellent sound quality – Bluetooth, DAC and amplification. Discover more about the tech below.

Much like top-level hi-fi loudspeakers, high-quality corded IEMs are engineered for sonic excellence, combining multiple hi-tech drive units to transmit sound directly into your ear canal.

Given the high-level of audio engineering in both, connecting a pair of these IEMs to the GO pod results in sound that is sooo much better than regular true wireless earbuds.

Charge!

The GO pod comes with a smartly designed charging case, with softly lined internal compartments and sufficient room to accommodate connected IEMs as well as the pods themselves. A 1500mAH rechargeable battery is built into the charging case; a pair of GO pods will play for up to seven hours on a single charge, while the case provides multiple recharges to enable up to 35 hours of playing time. The case supports both Qi wireless charging and USB-C fast charging.

FEATURES

• Combine with high-performance IEMs for unrivalled TWS (True Wireless Stereo) sound

• State-of-the-art HD Bluetooth - LDAC*, LHDC/HWA*, aptX Adaptive, aptX HD, aptX LL, aptX, AAC, SBC

• Premium QCC5144 Bluetooth 5.2 chipset – Snapdragon Sound and Qualcomm High Speed

• MasterHIFI DAC delivers dynamic and expressive sound with minimal battery drain

• Fully balanced amplifier - ultra-low distortion and a silent background with sensitive IEMs

• Four selectable digital filters and auto impedance matching for perfectly tailored sound

• Compatible with MMCX, 0.78mm and Pentaconn Ear IEM connections

• Built-in mic with Qualcomm cVc noise cancellation for ultra-clear voice calls

• Upgradeable firmware for future feature expansion

• Water- and sweat-resistant enclosure with touch control

• Lightweight and ergonomically shaped for a comfortable fit

• Charging case includes 1500mAH battery for up to 37 hours battery life

• Supports Qi wireless and USB-C quick charge

Specifications

• Bluetooth version： Bluetooth 5.2TM
• Codecs： LDAC*, LHDC/HWA*, aptX Adaptive, aptX HD, aptX LL, aptX, AAC, SBC
• Chipset: Qualcomm QCC 5100 Series
• Chipset: 10 m
• Auto impedance detection: 16Ω/32Ω/64Ω/300Ω
• SNR: 32Ω ≥129dB (A) / 300Ω ≥132dB (A)
• THD + N: ≤0.002% (1kHz/32Ω)
• Frequency response: 10-20kHz(-3dB) LDAC
• Battery: Ear hood 180mAh + Charging box 1500mAh
• Working hours: Ear hood ~7h + Charging box ~30h
• Charging time: Ear hood ~1.5h + Charging box ~2h
• Power System: 5V/1A or 5V/2A Qi certied charger
• Dimensions:
• Ear hood 43.5 x 16.4 x 9.5 mm (1.7" x 0.6" x 0.4")
• Charging box 116 x 76 x 38.5 mm (4.6" x 3" x 1.5")
• Net weight:
• Ear hood 12g (0.42 oz)
• Charging box 126g (4.44 oz)
• Limited Warranty: 12 months**
• *LDAC - 660k(stereo) 990k(mono), LHDC - 560(Stereo) 900k(mono)
• **12 months typical or as permitted/required by local reseller laws.
• ***Specifications are subject to change without notice